Expert Answers about Holiday Rambler Vacationer Motorhome

• Correct Steering Stabilizer for a 2017 Holiday Rambler Vacationer 35P
• The 2017 Holiday Rambler Vacationer 35P is on a Ford F-53 chassis which I believe you alluded to therefore the correct Roadmaster Reflex Steering Stabilizer for you is part # RM-RBK22-RSSA. I have attached an install video of the stabilizer installed on a similar motorhome with the same chassis for you as well.
  view full answer...


• Motor Upgrade Kit For A 1999 Holiday Rambler Vacationer With Lippert 32 Series Steps
• Yes! The Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145 is everything you need for your 1999 Holiday Rambler with the Lippert 32 series steps. The motor included in this kit has 40% more torque than your OEM motor, and includes screws, washers, and nuts for installation.
  view full answer...


• Can I Dolly Tow a 2019 Ford Edge SEL with FWD
• Yes. According to my research, the FWD models of the 2019 Ford Edge SEL should be towed using a dolly; I would recommend checking your vehicle's owner's manual to confirm this information. The Demco Kar Kaddy SS Tow Dolly # DM9713045 is the perfect solution to accomplish this as long as the distance between the outside tire treads on your vehicle is less than 76". On top of the hydraulic disc brakes that make this tow dolly a great choice, the EZ latch surge coupler eliminates the need...
  view full answer...


• Steering Stabilizer For 2008 Holiday Rambler Coach with Roadmaster Chassis With Leaf Springs
• I was able to confirm that the steering stabilizer you need for your 2008 Holiday Rambler motorhome with Roadmaster chassis with leaf springs is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK8-RSSA. I confirmed the fit with Roadmaster Inc. They don't have any Anti-Sway Bars compatible with your chassis at this time.
  view full answer...


• What Size Bolt Does the Replacement Jam Nut # WM9072F Fit
• The Replacement Jam Nut # WM9072F that you referenced does look similar to the jam nuts that you are currently using to secure your Wheel Masters cover. To determine if they will fit your application though you need to measure your bolt size. This jam nut has 32 mm dimensions so your bolt needs to match for a fit. If you happen to have the 19F0J wheel liners then you need part # WM9073 instead.
  view full answer...